OEM Best partial discharge testing of cables Manufacturer – GDPD-414H Handheld Partial Discharge Detector – HV Hipot
OEM Best partial discharge testing of cables Manufacturer – GDPD-414H Handheld Partial Discharge Detector – HV Hipot Detail:
Pictures for reference only.
The GDPD-414H handheld Partial Discharge Detector adopts smart quick intelligent power test system (Soft No. 1010215, trademark registration number 14684481). It can flexibly configure various sensors according to different products to be tested. TEV, ultrasonic and HFCT are suitable for partial discharge detection of high-voltage switchgear and ring network cabinet; Ultrasonic and UHF are suitable for detecting GIS; Ultrasonic and HFCT are suitable for testing power cable. The built-in expert diagnosis system can analyze the test data and judge the discharge energy and possible parts. It is widely used in electric power and railway.
Features
● Portable ABS engineering chassis. All PD detection hosts, tablets, sensors, chargers and signal cables are placed in the portable engineering chassis. The total weight is less than 5KG, easy for carrying and operating.
● High-speed sampling board, 4-channel synchronous data acquisition, signal processing, feature parameter extraction, data can be sent to the handheld terminal by wire and wireless.
● Analyze software based on ARM embedded system. Display software based on windows system.
● A data acquisition host can simultaneously configure 2 or 4 channels (selected by buyer) of the same or different sensors and simultaneously collect and analyze 2 or 4 channels of signals.
● 8.1inch 1280 x 800 IPS touch screen.
● The software system judges the discharge energy and location according to the detection data, and it can display the PRPS and PRPD maps, ellipse diagrams, discharge rate maps, QT maps, NT maps, PRPD cumulative maps-ϕ-Q-N maps of each signal channel, and can display amplitude and pulse number of each signal channel. All the data can be stored.
● Over-limit alarm. Using three-color indication modes of red, yellow and blue, which indicates the severity of partial discharge and facilitates information reading.
● Average trouble-free time is over 50000hours
● Safety performance: meets GB/T 19862-2005 general requirements for switchgear monitoring equipment.
● Electromagnetic compatibility:
Electrostatic discharge immunity meets level IEC 61000-4-2: 2001
Damped oscillatory magnetic field immunity meets IEC 61000-4-10: 1993 level 3
Power frequency magnetic field immunity meets IEC 61000-4-8: 2001 level 3
Pulse magnetic field immunity meets IEC 61000-4-9: 1993 Level 3
Power supply: powered by 12V lithium battery, power consumption < 10W, continuous working for more than 7 hours.
● Environmental conditions:
Storage temperature: -40℃ ~ +85℃,
Working temperature: -20℃ ~ +60℃,
Relative humidity: 5% ~ 95% without condensation at 25℃
● Lightweight and easy to carry, it is suitable for field use
Signal acquisition host weight <0.8kg
Specifications
| PD signal acquisition host | |
| CPU Working frequency | 800MHz |
| Operating system | Linx embedded operating system |
| Wired network port | LAN network port |
| Wireless network port | Built-in wireless WiFi |
| System running memory | 512M |
| System storage memory | 256M |
| Data acquisition frequency | 80MHz |
| Ultrasonic detection channel | |
| Measurement range | 0-60mV |
| Frequency detection range | 20~200kHz |
| UHF detection channel | |
| Detection frequency | 300~1500MHz |
| Measurement range | -80~10dBm |
| Error | ±1dBm |
| Resolution | 1dBm |
| HFCT detection channel | |
| Frequency range | 0.5~100MHz |
| Error | ±1dB |
| Dynamic Range | 60dB |
| Measurement range | 0-100mV |
| Accuracy | 1dB |
| TEV detection channel | |
| Frequency range | 3~100MHz |
| Error | ±1dB/mV |
| Sensitivity | 0.01mV |
| Measurement range | 0-60dB/mV |
| Resolution | 1dBm/mV |
| Battery | |
| Built-in battery | Lithium battery, 12V, 2000mAh |
| Use time | about 6 hours |
| Charging time | About 2 hours |
| Battery protection | Over-voltage and over-current protection |
| Battery charging | |
| Rated voltage | 12.6V |
| Charging output current | 2A |
| Operating temperature | -20℃-60℃ |
| Operating humidity | <80% |
| Handheld display terminal (industrial grade) | |
| CPU | Intel Quad Core Atom Z3735F |
| GPU | Intel HD Graphic (Gen7) |
| Flash | 32GB |
| RAM | 2GB |
| Operating system | Windows10 |
| Display | 8.1 inch 1280×800 IPS screen |
| Network interface | Wifi and Bluetooth |
| Battery | 3.7V 8500mAH polymer lithium ion battery |
| Size | |
| PD acquisition host size | 240mm*165mm*55mm |
| PD acquisition host weight | 0.65kg |
| Display tablet terminal size | 395mm*295mm*105mm |
| Display tablet terminal weight | 0.85kg |
| Overall box size | 570mm*360mm*240mm |
| Working environment | |
| Working temperature | -20℃~50℃ |
| Environment humidity | 0~90%RH |
| IP level | 54 |
Product detail pictures:
Related Product Guide:
We believe that long expression partnership is often a result of top of the range, value added service, prosperous encounter and personal contact for OEM Best partial discharge testing of cables Manufacturer – GDPD-414H Handheld Partial Discharge Detector – HV Hipot , The product will supply to all over the world, such as: Boston, Ecuador, United States, We have been fully aware of our customer's needs. We deliver high quality products, competitive prices and the first class service. We would like to establish good business relationships as well as friendship with you in the near future.
By Patricia from Croatia - 2018.09.23 18:44
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Judy from Algeria - 2017.11.20 15:58
