Transformer CT/PT Analyzer is used for automatic testing of protection and metering CT/PT. It is suitable for laboratory and on-site testing. But there are also friends who have not been in contact with this instrument, for some basic operations, similar to wiring, panel controls are not familiar. Today, HVHIPOT will give you the answer.
The GDHG-306D transformer comprehensive tester is designed for automatic testing of protection and metering CT/PT. It is suitable for laboratory and on-site testing. Reference standards GB 1207-2006, GB 1208-2006.
HVHIPOTGDHG-306D transformer CT/PT Analyzer
Technical characteristics
Support detection of CT and PT
No need to connect other auxiliary equipment, a single machine can complete all test items.
It comes with a miniature fast printer, which can directly print the test results on site.
The operation is simple, with intelligent prompts, making it easier for users to operate.
Large-screen LCD, graphical display interface.
The CT/PT (excitation) inflection point value is automatically given according to the regulations.
Automatically give 5% and 10% error curves.
3000 sets of test data can be saved, which will not be lost after power failure.
Support U disk transfer data, which can be read by a standard PC and generate WORD report.
Small and light weight ≤22Kg, very conducive to on-site testing.
1. The red and black two-core wires are connected to the primary and secondary jacks on the panel of the transformer ratio tester, and the other end is connected to the primary and secondary corresponding to the current transformer. The red wire is connected to the k1 terminal, and the black wire is connected Is the k2 end;
2. After connecting the wire, plug in the power supply, turn on the power switch, press the panel measurement button, wait for about 10 seconds, the transformer will display the measurement result, and the level will also display the wiring method and level of the transformer;
3. Observe the grade indication. If the display is additive, it means that the red or black line is connected to the grade, which means the wiring grade is wrong. If it is degraded, it means that the red or black line is connected to the grade. Degradation means that the wiring grade is correct.
Therefore, before using it, you need to read the instructions carefully and operate strictly in accordance with the instructions! If you have any questions, please contact: HVHIPOT+86-27-85568138
Post time: Sep-27-2021